BIOS/UEFI Setup Guide: Boot from a CD, DVD, USB Drive or SD Card

Windows runs on thousands of computer configurations, but installing a new operating system like Windows 10 on the variety of configurations that exist is another thing. The steps may be different depending on whether your computer has an existing Windows 10 installation on it, an earlier version of Windows on it or a completely different operating system on it, like macOS or Linux. In each case, installing Windows 10 relies on booting from a device other than your main hard disk drive (HDD) or solid state drive (SSD). To do that, you need to access the BIOS or UEFI setup page. Sometimes, this is easier said than done.

In this guide, we’ll walk through the basic steps that apply to most scenarios. Then, we’ll discuss some troubleshooting and alternate methods, in case the simple approach doesn’t work for you.

BIOS vs. UEFI: What’s the Difference?

Each computer, whether it’s a DELL, HP, Acer or even a custom built system, is an island unto itself before Windows 10 (or some other operating system) starts. Since the 1980s, hardware vendors have worked together to standardize around common access routines and commands for managing your BIOS Boot Options. The BIOS, which stands for Basic In Output System, is a critical bit of low-level code stored in nonvolatile memory that your computer uses to manage your hardware and load Windows 10 or another operating system.

A new standard called UEFI or Universal Extensible Firmware Interface came online a decade ago and became the standard for new PCs and devices pre-installed with Windows 8 or later. UEFI offers more advanced options than BIOS, with support for features such as a graphical user interface and mouse support, making it easier to configure boot and hardware settings. UEFI also supports recent security standards required by Windows 10 and previous releases such as Secure Boot, which maintains the integrity of a computer’s state and prevents malicious code from compromising your system at boot time. After decades of systems using BIOS, malware has become more sophisticated, where it is even possible for malicious code to easily infect key operating system code such as the Master Boot Record.

How to Access Your BIOS or UEFI Setup Screen

Because of the variety of brands and configurations, and the ongoing revisions to these systems, this article is not exhaustive. That said, the following provides a comprehensive list of common methods for booting into the BIOS or UEFI firmware interfaces.

To enter the BIOS, you need to press a certain key or combination of keys while your computer is booting up. Usually, your window to do this is very brief—you have to press the button when the splash screen with the manufacturer’s logo is displayed. If it seems like your computer boots too fast for you to get a chance to hit the button, you may need to disable fast startup.

Here is a list of the common functions or commands for loading the BIOS. Please note, your BIOS screen might display a hint to indicate the appropriate function key for loading the firmware. Start your computer then proceed to strike the appropriate key or command to load the BIOS. After loading the BIOS or UEFI, connect your USB media or connect the DVD install media.

Brand / Manufacturer	Key
Acer (Aspire, Altos, Extensa, Ferrari, Power, Veriton, TravelMate)	F2 / Delete
Acer (older models)	F1 / Ctrl + Alt + Esc
ASRock	F2 / Delete
Asus	Delete
Biostar	Delete
Chaintech	Delete
Compaq (Deskpro, Portable, Presario, Prolinea, Systempro)	F10
Compaq (older models)	F1 / F2 / F10 / Delete
Dell (Dimension, Inspiron, Latitude, OptiPlex, Precision, Vostro, XPS)	F2
Dell (older or other models)	Ctrl + Alt + Enter / Fn + Esc / Fn + F1 / Delete / Reset twice
eMachines (eMonster, eTower, eOne, S-Series, T-Series)	Tab / Delete
eMachines (older models)	F2
Foxconn	Delete
Fujitsu	F2
Gigabyte	Delete
HP (Alternative, Tablet PC)	Esc / F2 / F10 / F12
HP (OmniBook, Pavilion, Tablet, TouchSmart, Vectra)	F1
Intel	F2
Lenovo (3000 Series, IdeaPad, ThinkCentre, ThinkPad, ThinkStation)	F1 / F2
Lenovo (older models)	Ctrl + Alt + F3 / Ctrl + Alt + Ins / Fn + F1
MSI	Delete
Pegatron	F2 / F10 / Delete
Samsung	F2
Sony	F1 / F2 / F3
Toshiba	F1 / Esc

Navigating BIOS / UEFI Setup

Each BIOS or UEFI looks different and works differently, but most share basic principles for navigation. For menu driven BIOS or UEFI interfaces, your keyboard’s arrow keys  are used to access and enter menus. The settings for configuring boot options are sometimes hidden under sub menus, which you will have to navigate using these keys.

Save

On my HP desktop, the option for changing the system’s boot order is located under Storage > Boot Order. On my other computer, an HP Elitebook, the boot order is called Boot Optionslocated under the System Configuration tab, which uses a graphical interface. So, the experience will vary depending on the system you are using; even if they are the same brands. Navigate through these interfaces by browsing and looking for logical labels that might suggest what you are looking for – storage, boot, disks, etc.

How to Change the BIOS / UEFI Boot Order to Boot from a USB / CD Drive

Save

Once you’ve found the Boot Order menu, the interface will present menus displaying the structure of your boot order. Boot order determines which devices your computer will try to boot from first, second, etc. when you turn it on.  Most often, your first boot device is your hard disk or SSD containing Windows 10. You can also have your DVD, CD or USB thumb drive, set as the first boot device without it affecting Windows 10 loading into main memory. If you have a removable storage device set as your first boot device the BIOS will check if there is any attached removable storage as part of POST (Power On Self Test). If a USB thumb drive or DVD is detected, the system will prompt you to boot from it before loading any existing operating systems on the local disk.

Save

Moving through the options will require using the arrow keys. If you don’t see your connected USB device listed, choose the USB storage listed under EFI or Legacy sources. Use the down arrow key to navigate to the selection; some older BIOS interfaces will require using function keys such as F5 and F6 to navigate up and down the boot order. After selecting the appropriate option, you will need to confirm these changes; pressing F10 will usually save them. If not, read the on-screen instructions, which will identify the appropriate function key for saving or accepting changes.

Tip: Instead of changing the boot order, some systems will let you boot directly into a certain device as a one-off. Check out the section below on the boot device menu / boot override.

Booting from a USB drive or CD/DVD

Once the desired option has been selected and confirmed, depending on the type of installation media you are using, you might see different options. USB media will immediately boot into a Windows Boot Manager, prompting selection of the architecture of Windows 10 – 32 or 64 bit – you would like to install.

Save

If you are installing from DVD media, Windows 10 setup will prompt you to hit any key on your keyboard to load setup.

From there, you should be home free. As long as you created your bootable installation media correctly, the on-screen instructions should guide you through the rest of the process.

Troubleshooting Boot Options

Some systems might encounter problems when attempting to boot from removable media. If you are following the steps above to a T and you’re still having issues, look into some of the items below.

• Accessing the UEFI setup page on a Microsoft Surface device. The steps for accessing the BIOS / UEFI page on Surface devices are a bit different. See the steps below for Setting Up UEFI on a Microsoft Surface.
• Changing UEFI settings on an out-of-the-box Windows 8 or Windows 10 device. For computers that you buy with Windows 8 or Windows 10 pre-installed, it may be tricky to access the UEFI / BIOS. See the steps below for Configuring UEFI on Windows 8 or Windows 10 Computers.
• What about Mac? Apple computers support installing Windows, but they don’t have a BIOS / UEFI setup page like your typical PC. See our section on installing Windows on a Mac below.
• Make sure the bootable media was created properly. Boot issues can sometimes be attributed to how the install media was configured or prepared. For instance, on UEFI-based systems – systems designed for Windows 8 or later – preparing the install media, if downloaded from the Microsoft software page, will require using the Microsoft Media Creation Tool or a third-party utility such as Rufus.
• Enable Legacy Boot Sources. If you are installing on an older computer using BIOS, selecting the option under Legacy Boot Sources or Legacy USB will let you start Windows setup from a USB or CD drive.
• Disable Secure Boot. Security technologies included in UEFI such as Secure Boot can be a blocker and prevent the system from booting external storage sources. Disabling Secure Boot, temporarily—normally accessible under the security menu or tab—will often resolve this.
• Disable Fast Startup. If you are unable to access the BIOS, you may need to disable Fast Startup, if it is enabled.
• Resetting BIOS settings. Some BIOS / UEFI setup screens have a factory reset option. This can sometimes be a quick fix, but proceed with caution. If you have your drive BitLocker encrypted with TPM enabled, this may make your existing system drive unusable. OF course, this is a non-issue if your goal is to reinstall your operating system from scratch.

Disabling Fast Startup

If you are attempting to load the firmware on a computer already running Windows, this might prove difficult because of the Fast Startup setting that might be enabled. Fast Startup was first introduced in Windows 8 as a way to make Windows start quicker after shutdown by caching key pieces of operating system code.

If you are experiencing problems loading your BIOS or UEFI or changing your boot order, start Windows then turn off Fast Startup.

1. Press Windows key + X
2. Click Power Options
3. Click Choose what the power buttons do
4. Click the link Change settings that are currently unavailable
5. Under Shutdown settings, uncheck Turn on fast startup (recommended)

Boot Device Menu / Boot Override

Some computers will let you press a function key that takes you to a direct menu where you can immediately choose, which volume: USB thumb drive, SD Card, external hard disk, local disk or optical media you would like to boot from. Dell and HP systems, for instance, will present an option to boot from USB or DVD after striking the F12 or F9 keys respectively. This boot device menu is accessed once you’ve already entered into the BIOS or UEFI setup screen.

Save

Here is a list of commands for accessing the direct boot menu on popular brands:

Brand	Command
Acer	Esc / F9 / F12
Asrock	F11
Asus	Esc / F8
Compaq	Esc / F9
Dell	F12
Fujitsu	F12
Gigabyte	F12
HP	Esc / F9
Intel	F10
Lenovo	F12
MSI	F11
Packard Bell	F8
Samsung	Esc
Sony Vaio	F11
Toshiba	F12

Microsoft Surface and Modern Windows 10 Devices

The Microsoft Surface uses its own unique interface for booting into the UEFI firmware interface.

First, you need to access your BIOS / UEFI setup utility on your Surface.

1. Make sure your Surface or Surface Pro is fully powered down.
2. Press and hold the volume up button located on the left side of the device.
3. Press and hold the power button for five seconds located on the top of the device.
4. Release the power button after five seconds but continue to hold down on the volume button until you see BIOS UEFI.

The Surface uses a combination of text-driven interface, touch and mouse input to modify boot settings. Navigate down to the option Configure Alternate System Boot Order using the down arrow key. Hit the Enter key, which will load a sub menu; use the up and down arrow to select the first boot device then hit Enter.

Save

Navigate down to the Exit setup menu, hit Enter, use the left or right arrow keys to select yes then hit Enter.

Save

Configuring UEFI on Windows 8 or Windows 10 Computers

If your computer or device is already running an existing version of Windows 8 or Windows 10, you might be able to initiate booting from removable storage from within the operating system. Click Start > Settings > Update & security > Recovery. Then, under Advanced startup, click Restart now.

If this option is not available, sign out of Windows 10, then hold down the shift key, click the Power menu, then click Restart. Continue to hold down the shift key then wait until the Recovery environment is loaded. The Choose an option menu lets you access and boot from removable media attached to the system.

Save

If you need to access advanced boot options, click Troubleshoot, then click the UEFI Firmware Settings to make further changes.

Save

What About Mac?

For the past 10 years, Apple Intel-based Macintosh computers have supported Windows. Most Macs will allow you to boot from a CD by pressing and holding C on startup. Booting an operating system other than OS X or macOS from a USB drive is a little more involved. We previously covered preparing your Mac for installing Windows 10 using the Boot Camp wizard in macOS. After preparing your boot camp partition and install media, booting from it is as simple as holding down the Option key before you hear the startup chime.

Save

Conclusion

One of the lessons users will learn from this is that not all computer configurations are alike, even if they are from the same brand. Hopefully, reading through this guide has given you enough background knowledge about the process to help you configure your particular system, or at least ask the right questions if you run into trouble.